Wire & Cable, Cable Accessories, Telecom Accessories, Energy Saving Lamp(CFL)...
КПСЭ нг(А)-FRFH 2×0.5mm² shielded Fire Alarm Cable
View Larger
КПСЭ нг(А)-FRFH 2×0.5mm² shielded Fire Alarm Cable
КПСЭ нг(А)-FRFH 2×0.5mm² shielded
Fire Alarm Cable
Cable construction :
Bare copper class 12×0.78mm
Type: Silicone Dia.over Dielectric: 0.070''''nom.(1.8mm)
Insulation Color:
Separator :
PET Foil
Drain Wire:
0.4 mm Solid tinned copper
Aluminum PET (100% Coverage 20% overlapping)
Dia.over Jacket: 0.196''''(5.0mm)
Print Legend:
HELLOSIGNAL NO.7110562 КПСЭ нг(А)-FRFH 2×0.5mm² shielded Cable MMDDYYYY
Electrical Properties :
Minimum  Bend Radius
Min.DC resistance
37.4 ohm/KM
Min.Insulation resistance
100 MΩ/km
Installation Temperature
Test voltage (rms value)
Max. Operating Voltage
300 V
Test Standards
180 minutes under fire of 750 degrees without short-circuit.
Fire hazard class of the cable on the classification of ГОСТ Р  31565-2012 - P1.
Cable flame retardant while installing in category A (ГОСТ Р IEC 60332-3-22-2005).
Indicator toxicity of the combustion products of polymeric material of the cable - not less than 41g / m.
Smoke generation during combustion and smoldering cable does not reduce the light transmittance of more than 50% (GOST R IEC 61034-2-2005).
The cable is designed for fixed installation for voltage to 300 V AC to 10 kHz or 420 VDC.
Order Informations :
100M/Reel,200M/Reel,500M/Wooden Spool
Delivery time
Normally 25 days after received the deposit.
Google Translate
Copyright © 2011 KINGTONE ELECTRONICS CO.,LTD. All rights reserved. Powered by
Products: Coaxial cable manufacturer, Power cable manufacturer, Solar panel manufacturer, RG59 with power cable, utp cat5e